Time-outs
The Global Icon
Using Slidebars and
Other Controls
From presentation level, press
within a topic. Press
'
If a slidebar, menu, or message is displayed, you have limited time in which to make a
keypad entry before the projector returns to presentation level
disappears. These time-outs may vary depending on what is displayed.
'
Menu options that include this icon apply universally to any incoming signal.
'
Most of the function menus allow you to change settings by using slidebars,
checkboxes, and pull-down lists. To select a slidebar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to change
(for example, press
Position menu).
•
Or move the highlight to the option desired and press
•
Or move the highlight to the option desired and press
immediately.
•
Or bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (NOTE: applies only to options having
their own key, such as Contrast, Brightness, Gamma, etc.).
•
For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slidebars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper keypress or numerical sequence of key presses.
Figure 3.5. Context-sensitive Help
to access general Help Topics. Scroll as necessary
Help
or
to return to your presentation.
Exit
Help
Figure 3.6. Accessing General Help Topics
1
3
Menu
to select "Vertical Stretch" in the Size &
Section 3: Operation
and the graphic
Help
(Enter).
to adjust
User's Manual
3-11
.