Pairing Bluetooth Devices - FLIR Exx series User Manual

12

Pairing Bluetooth devices

General
Before you can use a Bluetooth device with the camera, you need to pair the devices.
Procedure
Follow this procedure:
NOTE
■
■
■
■
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010
1
Go to (Setup) .
2 Go to the Connectivity tab.
3 Activate Bluetooth.
4 Select Add Bluetooth device.
5 Select Scan for Bluetooth device and wait until a list of available devices
is displayed.
6 When a Bluetooth device is found, select the device to add it. Now the device
is ready to be used.
You can add several devices.
You can remove an added device by selecting it and then selecting Remove.
After adding a MeterLink device, such as the Extech MO297 or EX845, the result
from the meter will be visible in the measurement result table.
After adding a Bluetooth-enabled headset, it is ready to be used in camera preview
mode.
23