Adjusting The Infrared Camera Focus Manually - FLIR Exx series User Manual

13.3

Adjusting the infrared camera focus manually

NOTE
■
■
Figure
T638779;a1
Procedure
Do one of the following:
■
■
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010
Do not touch the lens surface when you adjust the infrared camera focus manually.
If this happens, clean the lens according to the instructions in section 20.2 – In-
frared lens on page 51.
The focus ring can be rotated infinitely, but only a certain amount of rotation is
needed when focusing.
For far focus, rotate the focus ring counter-clockwise (looking at the touch-screen
LCD side).
For near focus, rotate the focus ring clockwise (looking at the touch-screen LCD
side).
13 – Handling the camera
25