Fetching Data From External Extech Meters - FLIR Exx series User Manual

16 Fetching data from external
Extech meters
General
You can fetch data from an external Extech meter and merge this data into the result
table in the infrared image.
Figure
T638370;a1
Supported Extech
■
meters
■
Technical support
support@extech.com
for Extech meters
This support is for Extech meters only. For technical support for infrared cameras,
go to http://support.flir.com.
NOTE
■
■
Procedure Follow this procedure:
42
Extech Moisture Meter MO297
Extech Clamp Meter EX845
This procedure assumes that you have paired the Bluetooth devices.
For more information about products from Extech Instruments, go to
http://www.extech.com/instruments/.
1 Turn on the camera.
2 Turn on the Extech meter.
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010