Creating And Setting Up A Difference Calculation - FLIR Exx series User Manual

15.3

Creating and setting up a difference calculation

General
A difference calculation gives the difference between the values of two known mea-
surement results.
NOTE
This procedure assumes that you have previously laid out at least two measurement
tools on the screen.
Procedure Follow this procedure to create and set up a difference calculation:
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010
1
Push to display the menu system.
2
Use the navigation pad to go to
3
Push to display a submenu.
4
Use the navigation pad to select
5
Push . This will display a dialog box where you can select the
measurement tools that you want to use in the difference calculation.
6
Push . The result of the difference calculation is now displayed in
the result table.
15 – Working with measurement tools
(Tools).
(Add difference).
39