Taking A Digital Photo - FLIR Exx series User Manual

18.1

Taking a digital photo

General
When you save an infrared image you can also take a digital photo of the object of
interest. This digital photo will automatically be grouped together with the infrared
image, which will simplify post-processing and reporting.
NOTE
This procedure assumes that you have not set the camera to automatically add a
digital photo.
Procedure
Follow this procedure to take a digital photo:
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010
1 To preview an infrared image, briefly pull and release the trigger.
2 Use the navigation pad to select Add photo.
3
Push to display a submenu.
4 Use the navigation pad to select Add digital camera photo.
Push to take the digital photo.
The digital photo will now be added to the IR image to what is called an
"infrared inspection group," and will be grouped together in the image
archive, and also when moving files from the camera to reporting software
on the computer.
18 – Annotating images
47