FLIR Exx series User Manual page 53

Procedure
Follow this procedure to change the object parameters:
NOTE
Of the parameters above, emissivity and reflected apparent temperature are the two
most important to set correctly in the camera.
Related topics For in-depth information about parameters, and how to correctly set the emissivity
and reflected apparent temperature, see section 28 – Thermographic measurement
techniques on page 150.
Publ. No. T559597 Rev. a500 – ENGLISH (EN) – December 10, 2010
1
Push to display the menu system.
2
Use the navigation pad to go to
3
Push to display a dialog box.
4 Use the navigation pad to select and change an object parameter.
5
Push . This will close the dialog box.
15 – Working with measurement tools
.
41