Power Cycle Option; Core Menu; Contrast Field - Motorola DSR-6100 Operator's Manual

3

Power Cycle Option

Core Menu

Contrast Field

38
Press any arrow button ( 4 ) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays.
Factory Default reset in progress..
The Power Cycle option reboots the DSR-6100 without losing internal user setup
information or downloaded network information. Pressing the ENTER button
causes the following caution message to appear.
CAUTION: Reset will interrupt service
Press E to continue or
Press any arrow button ( 4 ) to back out of the field and leave it unchanged,
or press the ENTER button to proceed. The following message displays
Power Cycle reset in progress. . .
Power Cycle reset in progress. . .
Press E to continue or Press E to continue or
Press the  buttons until the Core menu appears. Use this menu to change the
front panel LCD contrast.
CORE
To adjust the LCD contrast, press the 4 button until the cursor is at the Contrast
label, and press the ENTER button to move into the field. Use the arrow buttons
(  ) to select a value between 0 and 30, with 0 representing the least contrast and
30 the most. Adjust the contrast so that the LCD panel can be read clearly. Press the
ENTER button to confirm the selection and exit the field.
Contrast
E 18
Default: 18
to stop
to stop to stop
: