Installation Menus; Manual Tune Menu - Motorola DSR-6100 Operator's Manual

3

Installation Menus

Manual Tune Menu

22
The purpose of the installation menus is to configure the ports and choose settings
that remain fixed over time. This section describes in detail each of the Installation
menus, fields, and options displayed on the LCD panel.
Return to the main top-level menu and then select the installation menu group.
With the blinking cursor at the upper left, press ENTER button to return to the main
top-level menu. Press the 4 buttons until the cursor is at the Install label, and press
the ENTER button. The DSR-6100 displays the previously selected sub-menu.
Use this menu to begin to acquire a DigiCipher II system signal, by selecting a
transponder frequency for one of the eight L-Band inputs. In addition, this menu
allows a user to select the ASI input or GigE input, as an alternative to RF ports 1
through 8.
MANUAL TUNE Input Mode Xpndr LFreq
E
MANUAL TUNE Input
E
MANUAL TUNE Input
E
Port 1 Xpndr 01 1430.00
ASI In
Multicast Address
GigE In 255.255.255.255
To specify an RF input port, see
"RF Usage" on page 24.
To specify the ASI In as the input port,
see "ASI Usage" on page 23.
To specify the GigE In as the input port,
see "GigE Usage" on page 23.