3
Factory Defaults Option
Power Cycle Option
22
The Factory Defaults option allows the user to reset the system to the programming
values originally set by the factory firmware.
Caution: Selecting this reset option deletes all defined setups and downloaded
information. This operation interrupts service output, so use it carefully.
Press the ENTER button. A warning message reminding you that all programming
will be lost if the action proceeds.
Press any arrow button (3456) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays.
The Power Cycle option reboots the DSR-6050 without losing internal user setup
information or downloaded network information. Press the ENTER button and a
warning message appears saying that the current service will be interrupted if the
action proceeds.
Press any arrow button (3456) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays
.