Motorola DSR-6100 Operator's Manual page 93

Power Requirements
LNB Power on RF Port 1
Dimensions
Weight
For restricted access locations, install the DSR-6100 only in restricted-access areas (dedicated equipment
rooms, equipment closets, or the like) in accordance with Articles 110-26, 110-27, or the NEC ANSI/NFPA70,
or per the applicable code in the country of installation.
Always connect the protective earthing to one the two permanently-protective Earthing Terminals on the back
panel of the DSR-6100. For exact location, see Figure 2-1 on page 9.
CAUTION: When connecting any of the eight RF IN ports, the RF-IN Antenna cable should only be
connected while the DSR-6100 is properly grounded and the shield of the coaxial cable should be
earthed in accordance with Article 820.93 of the NEC, ANSI/NFPA 70:2005, or equivalent.
DSR-6100
Electrical
100 to 240 VAC, 50/60Hz, 1.5A maximum, 290 Btu
16 to 22 VDC, 450mA maximum
Mechanical
20.5" x 19" x 1.75" (IRD without packaging)
27" x 22" x 7.5" (IRD with packaging)
18.5 lbs. [8.4 kg] (Finished goods with packaging and accessory)
12.5 lbs. [5.7 kg] (Without packaging)
Special Instructions
87