BASIC OPERATION
Turning Power On and Off
POWER
Press
on the front panel to turn the DCT* on or off. When using
the remote control, be sure it is in cable mode by pressing
before pressing
Changing Channels
You can change channels in two ways:
•
CHANNEL
Press
CHANNEL
press
channel selection.
•
Enter the number of the channel you want to tune using the
number keys on the remote control.
Adjusting the Volume
+ or – on the remote control to adjust the volume. When
VOLUME
Press
you adjust the volume, the volume scale is displayed on the screen.
MUTE
Press
on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the DCT* to
approximately ¾ of the maximum volume level and then adjust the
audio levels on external devices such as your TV or A/V Receiver.
Interactive Program Guide
The interactive program guide displays information about TV programs
and enables you to access features such as Parental Control or
Pay-Per-View. Interactive program guides can vary with each cable
service provider. Refer to the interactive program guide instruction
manual for detailed instructions.
POWER
.
or
on the front panel of the DCT*, or
+ or - on the remote control to step through the
6
CABLE