Gige Subnet Mask Menu; Gige Default Gateway Menu - Motorola DSR-6100 Operator's Manual

GigE Subnet Mask Menu

Use the following procedure to set and view the GigE Subnet Mask for the right
Ethernet port on the back panel of the DSR-6100. Press the  buttons until the
GigE Subnet Mask menu appears. The GigE subnet mask is represented in the
common dotted-decimal format. Contact the network administrator for details
about configuring the GigE port for operation on your local network.
Press the 4 button until the cursor is at the Subnet Mask label, and press the ENTER
button to move into the field. Use the arrow button ( 4 ) to enter the desired
address and then press the ENTER button to confirm the selection and exit the field.

GigE Default Gateway Menu

Use the following procedure to set and view the GigE Default Gateway address for
the right Ethernet port on the back panel of the DSR-6100. Press the  buttons
until the GigE Default Gateway Address menu appears. The GigE Default Gateway
is an address that is represented in the common dotted-decimal format. Contact the
network administrator for details about configuring the GigE port for operation on
your local network.
Press the 4 button until the cursor is at the GigE Default Gateway label, and press
the ENTER button to move into the field. Use the arrow buttons ( 4 ) to
enter the desired address and then press the ENTER button to confirm the selection
and exit the field.
DSR-6100
PORT GigE
E
PORT GigE
E
Default: 255.255.255.000
Subnet Mask
255.255.255.000
Default: 192.168.054.002
Default Gateway
192.168.054.002
51