Basic Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Motorola DCT2000 User Manual

BASIC OPERA TION

Turning Power On and Off

Press on the front panel to turn the DCT 2000 on or off. If using the
POWER
remote control, be sure it is in cable mode by pressing
.
POWER

Changing Channels

You can change channels in two ways:
Press or on the front panel of the DCT 2000, or
CHANNEL
press or on the remote control to step through the
CHANNEL
channel selection.
Enter the number of the channel you want to tune using the numeric
keys on the remote control.

Adjusting the Volume

Press or on the remote control to adjust the volume. When
VOLUME
you adjust the volume, the volume scale is displayed on the screen.
Press on the remote control to turn the sound off and on again.
MUTE
For best audio quality, use the remote control to set the DCT 2000 to
approximately ¾ of the maximum volume level and then adjust the audio
levels on the external devices.
, and then press
CABLE
1 6