Diagnostic Menus; Menus Field; Clear Cntrs Field - Motorola DSR-6100 Operator's Manual

Diagnostic Menus

Use the DSR-6100's diagnostic menu to acquire information for troubleshooting
purposes. The menus also provide test waveforms and use other diagnostic
information displayed on an NTSC television monitor connected through the back
panel video output.
CAUTION: Turning on diagnostics changes the video or audio output, and these
diagnostic screens or tones may be transmitted to the cable customers if the unit is
connected to the cable plant.
Press the  buttons until the DIAGNOSTIC menu appears.

Menus Field

Use the Menus field to enable or disable the on-screen diagnostics. Press
the 4 button until the cursor is at the MENUS label, and press the ENTER button to
move into the field. Press the  buttons to scroll to the desired screen. Press the
ENTER button to confirm the selection and exit the field.
Notice that if the Menus field is set to any option other than Off, Diag F, or Diag G; the
Clear Cntrs (Clear Counters) field also appears.
Use the  buttons to choose the desired option (Fast Facts 1 through 5 or Diag A
through Diag G) and press the ENTER button to confirm the selection and exit the
field. For more information about Fast Facts screens, see "Diagnostics" on page 75.

Clear Cntrs Field

Use this field to reset selected counters to zero. This field is primarily for use with
hotline troubleshooting, and it is recommended that it be used only when so directed
and does not affect the unit's operation, but it may give misleading troubleshooting
results. To clear counters, press the 4 button until the cursor is at the Clear Cntrs label,
and press the ENTER button to move into the field. Press the  button to select Yes
and press the ENTER button to reset the counters to zero and return the field to No.
DSR-6100
Default: Off
63