Status Display Menus; Status0 Menu - Motorola DSR-6100 Operator's Manual

3

Status Display Menus

Status0 Menu

54
Status display menus provide information regarding the current status of the
DSR-6100. This menu lists important Satellite Multiplex Decrypter parameters.
These fields are not editable, and the displayed information is either (1) the result of
changes in an installation or channel selection menu, or (2) a parameter the
DSR-6100 reports as part of its operation.
Press the  buttons until the Status0 menu appears.
This status-only field displays the following status conditions. Press the 4 button
until the cursor is at the Health label, and press the ENTER button. Use the 
buttons to scroll through any errors displayed.
• Good
• Alarm:Video lost
• Alarm:Signal lost
• Alarm:Authorization lost
• Alarm:Fan fault
• Alarm:Transcodes Fault
Note: When the Alarm Trigger (described on page 33) is set to Disable, the
STATUS0 Health field displays Good, even if error conditions are present.
No Alarm Condition. The DSR-6100 is
working correctly.
The DSR-6100 does not have primary Video
Out. This could be due to loss of authorization
or signal.
The DSR-6100 does not have signal lock.
The DSR-6100 is not authorized for the
current service.
One or more fans have stopped working and
need to be replaced.
One of the transcoders has faulted.