Reset Menu; Factory Defaults Option; Power Cycle Option - Motorola DSR-4530 Operator's Manual

3

Reset Menu

Reset Type Field

Factory Defaults Option

Power Cycle Option

28
The Reset menu allows the user to reset the unit to the factory default settings or
perform a power cycle. Press the 56 buttons until the Reset menu appears (shown
below).
RESET
E
Press the 4 button until the cursor is at the Reset Type label, and press the ENTER
button to move into the field. Press the 56 buttons to display the two options:
Factory Defaults, and Power Cycle, which are explained below.
Caution: Selecting this reset option deletes all defined setups and downloaded
information. This operation interrupts service output, so use it carefully.
The Factory Defaults option allows the user to reset the system to the programming
values originally set by the factory firmware. When the option is shown, press the
ENTER button and a caution message is displayed:
CAUTION: IRD memory will be reset
Press E to continue or
Press any arrow button ( 3456 ) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed.
During factory reset, the following message is displayed:
Factory Default reset in progress. . .
Press E to continue or
The Power Cycle option reboots the DSR-4530 without losing internal user setup
information or downloaded network information. When the option is shown, press
the ENTER button and a caution message appears indicating that the current
service will be interrupted if the action proceeds.
CAUTION: Reset will interrupt service
Press E to continue or
Reset Type
No
Default: No
to stop
to stop
to stop