Sounder - Honeywell LYNX Touch Series Installation And Setup Manual

The following system options are programmed in this section:
Option
Burglary Alarm Sound
Burglary Bell Timeout
Fire Bell Timeout
Arm Confirm
Alarm Options
Note: If applicable, preprogrammed defaults for the LYNX Touch Control are shown on the screen unless otherwise noted.
SCREEN

Sounder

Burglary Alarm Sound
Yes
Burglary Bell Timeout
4 Minutes
Fire Bell Timeout
4 Minutes
Arm Confirm
None
Alarm Options
Unlimited
Switches the full 110 dB alarm sound for burglary On/Off.
Select the time for timeout of the Burglary Alarm sounder.
Select the time for timeout of the Fire Alarm sounder.
Enable sounder "ding" when system is armed via the selected RF device.
Select a limit for the number of times an alarm can sound for a specific zone.
Note: This option does not apply to the LYNX Touch SIA control.
Select "Sounder"
The System displays the following options:
Burglary Alarm Sound
Fire Bell Timeout
Alarm Options
Select "Burglary Alarm Sound". The System toggles between Yes* and No:
Select "Burglary Bell Timeout". The System scrolls between the following options:
No
4 Minutes
8 Minutes
12 Minutes
16 Minutes
Select "Fire Bell Timeout". The System scrolls between the following options:
No
4 Minutes
8 Minutes
12 Minutes
16 Minutes
Select "Arm Confirm". The System scrolls between the following options:
None
All RF
RF Key Fob
RF Keypad
Note: This option does not apply to the LYNX Touch SIA Control.
Select "Alarm Options". The System scrolls between the following options:
Unlimited
1
2
10
Select "Save".
LYNX Touch Installation and Setup Guide
Programming the Control
Function
ACTION
Burglary Bell Timeout
Arm Confirm
- 39 -
Sounder