System Features; Features - Honeywell LYNX Touch Series Installation And Setup Manual

The LYNX Touch control is a self-contained, rechargeable wireless control/communicator that features easy
installation and usage. A built-in speaker provides voice annunciation of system status along with voice
descriptors of each zone. An internal module (if provided) allows the LYNX Touch to communicate with the
Central Station via the Internet or GSM Cellular Wireless.
UL
LYNX Touch is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N
300-03866/LYNXRCHKIT-SHA) is installed.

Features

System Features

•
4.7-inch color graphic touch screen
•
Message center (for user recorded messages)
•
Voice announcement of system and zone status
•
Voice chime
•
Reminders
•
Automatic stay arming
•
Remote phone control
•
Speaker phone operation
•
"Follow me" reminder and system announcements
•
16 User Codes (Installer, Master, Babysitter, Duress)
•
3 Panic Functions
•
16 Programmable reminders
•
Supports up to four Mobile Internet Devices (MID) (WiFi
Tablet) that duplicates functions of the LYNX Touch
i.e.; Security, Web Content and Home Automation
control)
Home Automation
•
Control Z-Wave Home Automation devices (requires
installation of a Communications Module). Control up
to:
- 3 thermostats
- 4 door locks
- 40 devices (outlets, switches, lamps/appliances)
•
Supports Z-Wave Network Wide Inclusion (NWI) Mode
•
Supports Garage Door Feature (5877 Relay
Receiver)
•
Up to 20 Programmable scheduled events, rules
and scenes.
Zones and Devices
•
64 total zones including 1 Hardwire (EOLR, N/C,
N/O) zone and up to 63 wireless zones (5800
Series transmitters)
•
2 Resident Monitor Zone Types
•
Supports wireless keypads
•
Built-in Case tamper
Communication
•
ADEMCO Contact ID
•
SIA (DC-03)
•
Internet central station communication
•
GSM cellular central station communication
•
WiFi Central station communication
•
Two-way voice communication
•
Supports AlarmNet remote services
LYNX Touch Installation and Setup Guide
System Power
•
Primary Power: Plug-in Power Supply, 110VAC to
9VDC, 2.7A output 300-04705 or 300-04065 (300-
04063 in Canada)
•
Backup battery: Rechargeable nickel-metal hydride
battery pack rated at 7.2Vdc. (P/N 300-03864-
1/LYNXRCHKIT-SC or 300-03866/LYNXRCHKIT-
SHA)
Alarm Output
•
Built-in sounder
•
Steady output for burglary/panic
•
Temporal (3) pulse output for fire alarms
•
Temporal (4) pulse output for carbon monoxide
alarms
•
Long Range Radio (GSM)/Audio Alarm Verification
•
Trigger output
Programming
•
Options stored in EEROM
•
Can be uploaded, downloaded or controlled via
IBM-compatible computer using Compass
downloader software and specified HAYES or
Honeywell CIA modem or via capable GSM, IP or
WiFi communications module
•
Flash downloading
Other Features
•
Exit error feature (detects difference between an
actual alarm and exit alarm caused by leaving a
door open after the exit delay expires)
•
Event log stores up to 128 events
•
RF jam detection
•
Two installer programmable user (Follow Me)
phone numbers
•
Advanced Protection Logic™ (APL) (Minimizes the
likelihood of the system being disabled before
notification can be sent to the Central Station
indicating that the premise has been
compromised.)
•
Displays web content including Local News,
Weather and Traffic (requires Total Connect
Service)
•
Dealer/Central Station messages (requires Total
Connect Service)
- 5 -
System Features