Test Modes; Testing The System; Armed System Test; Dialer Test - Honeywell LYNX Touch Series Installation And Setup Manual

Central Station Messages

The following messages are sent by the L5100 communications modules (GSMVLP5-4G/GSMVLP5CN4G, ILP5 and
L5100-WiFi) for the conditions listed below.
Alarm Condition
Power On / Reset
Primary Communication Path Supervision
Secondary Communication Path Supervision
Test
The control panel sends its own general code (E353) for a trouble condition. The Control panel sends tamper trouble
(E341), tamper alarm (E145), power loss (E301) and low battery (E302) messages.
LYNX Touch Installation and Setup Guide
Alarm Code Restore Code
E339 C0803
E350 C0951 R350 C0951
E350 C0952 R350 C0952
5555 5555 9
- 59 -
System Operation