Mechanics Of Programming; Navigating Menus; Touch-Screen Display; Navigation Keys - Honeywell LYNX Touch Series Installation And Setup Manual

Hide thumbs Also See for LYNX Touch Series:
Table of Contents

Advertisement

LYNX Touch Installation and Setup Guide

Mechanics of Programming

Navigating Menus

Touch-screen Display

LYNX Touch's Liquid Crystal Display (LCD) touch-screen displays variable icons and text on "screens". The
screen displays status icons and associated text, the current time and date, system status information and
menu choices. The Menu area includes a list of commands, or choices that apply to the current selection. The
status area provides information about various system events and a colored bar also provides an indication
of system status. A "Home Screen" is displayed whenever power is applied to the system. In addition the
Green (Ready) LED is lit when the system is ready or flashes when it is not. The Red (Armed) LED is lit
when the system is Armed.
SYSTEM
STATUS
SYSTEM/ZONE
STATUS
Arm Away
Delay
LEDs
FUNCTION
KEYS

Navigation Keys

Navigating through the screens is accomplished by lightly touching the menu item on the touch-screen. Once
activated, the control will take you to the next screen. Selecting the "Home" (cancel) key or the "
return you to the previous screen at any time unless System Programming mode is active. By Touching
(selecting) an icon or key the system, depending on the function, advances to another screen, toggles between
options or scrolls through multiple options that can be selected. The system provides a prompt when a
specific input is required.
Note: You may find it convenient to adjust the volume setting before entering the Program Mode. This will allow you to clearly
hear the feedback announcements or system beeps from the system's built-in speaker. To adjust the volume, select
"More" on the "Home Screen" and then select "Settings". Adjust the volume using the slide displayed on the Settings
screen and then select "Save" to accept. Upon exiting the Program Mode, the system resets the volume to the default
value (mid level).

Dashboard Screen

When Total Connect Services are connected and web content is enabled, the Home Screen is replaced by the
Dashboard Screen. System Status is displayed at the top of each screen. In addition to the system status, the
Dashboard Screen displays time and date, weather and five selection "icons".
Ready To Arm
1 :
2
35
PM
October 26, 2011
Security
Mostly Sunny
68
F
F
Feels Like 71
72
5-Day Forecast
Automation
Ready To Arm
Zones
Arm Stay
Message
10:18 AM June 8, 2010
Home Screen (page 1)
News
Traffic
Notices
5100-100-001-V1
Function Keys
72
Automation
Phone
More
5100-500-003-V0
Selection
Security
Notices *
Automation *
News *
Traffic *
5-Day
Forecast *
Weather *
* Requires Total Connect Services
- 16 -
Panic key
Initiates panic alarm options when
depressed for 4 seconds.
Away key
Initiates Arm Away option.
Off (Disarm) key
Initiates disarm process.
Home key
Used to exit from a screen or return to
the home screen.
Function
Provides access to Security Menu.
Provides access to Notices page.
Provides access to Automation page.
Provides access to News page.
Provides access to Traffic page.
Provides access to local 5-Day weather
forecast page.
Provides local forecast and severe
weather alerts (if enabled)
" Key will

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents