Honeywell LYNX Touch Series Installation And Setup Manual page 36

Hide thumbs Also See for LYNX Touch Series:
Table of Contents

Advertisement

LYNX Touch Installation and Setup Guide
Programming the Control
SCREEN
Report Open/Close
Disabled
Report Tests
Disabled
Follow Me Phone 2
Phone Type
None
Phone Number
Report All
Press to Report All
Report Alarms
Ensabled
Report Troubles
Ensabled
Report Open/Close
Disabled
Report Tests
Enabled
Report Selection
Arm Away
Enabled
Arm Stay
Enabled
Disarm
Enabled
Exit Error
Enabled
Recent Closing
Enabled
Event Log Full
Enabled
Select "Open/Close". The System toggles between "Disabled" and "Enabled".
Select "Report Tests". The System toggles between "Disabled" and "Enabled".
Select "Follow Me Phone 2" to program the "Follow Me" Reminder telephone number 2.
Select "Phone Type". The System toggles between "None" and "Follow Me".
Select "Phone Number". Enter the "Follow Me" Phone Number 2 on the displayed keypad.
Select "Report All". The System toggles between "Press to Report All" and "Report All Set".
If "Report All" is selected all reporting options will be "Enabled". Select the "Save" key to
return to the Reporter options screen.
Select "Report Alarms". The System toggles between "Disabled" and "Enabled".
Select "Report Troubles". The System toggles between "Disabled" and "Enabled".
Select "Open/Close". The System toggles between "Disabled" and "Enabled".
Select "Report Tests". The System toggles between "Disabled" and "Enabled".
Select "Report Selection". The System displays the following options:
Arm Away
Disarm
Recent Closing
Trouble
Use the down
arrow to scroll to the next page of options.
Alarm Restore
Test
Bypass
AC Loss
Use the down
arrow to scroll to the next page of options.
Low Battery
RF Low Battery
Select "Arm Away". The System toggles between "Disabled" and "Enabled".
Select "Arm Stay". The System toggles between "Disabled" and "Enabled".
Select "Disarm". The System toggles between "Disabled" and "Enabled".
Select "Exit Error". The System toggles between "Disabled" and "Enabled".
SIA: The LYNX Touch default is "Enabled" and is not selectable.
Select "Recent Closing". The System toggles between "Disabled" and "Enabled".
SIA: The LYNX Touch default is "Enabled" and is not selectable.
Select "Event Log Full". The System toggles between "Disabled" and "Enabled".
ACTION
Arm Stay
Exit Error
Event Log Full
Trouble Restore
Alarm Cancel
Test Restore
Bypass Restore
AC Loss Restore
Low Battery Restore
RF Low Battery Restore
- 36 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents