Reinstalling The Printer - Canon iPF6100 Service Manual

damage the printhead.
(6) Remove the maintenance cartridge, and then
package it so that waste ink does not leak.
(7) Attach all external covers.
(8) Open the top cover, and then secure the carriage
with the belt stopper.
(9) Close the top cover.
(10) Attach the cushioning materials and tape.
(11) Pack the printer in the packing box, and then put
the roll media, ink tank, and optional devices in
another packing box for moving.
Use the original packing materials for the printer and
other optional devices. If they are not available, pack
them with a sufficient amount of cushioning
materials.
Before transporting the printer, be sure to go through
the following steps to protect the internal
mechanism. For the printer packaging work and the
installation work after transportation, refer to the
"Quick Start Guide".
* When "Check Free Space in Maintenance C" or
"Replace Maintenance Cartridge" is shown on the
display, you cannot
transportation. First replace the maintenance
cartridge, and then
transportation.
* Do not incline the printer during transportation.
The internal ink may leak and the surrounding area
may be stained. If it is necessary to place the printer
with either side up or down or to incline the printer,
contact your sales agent.

3.2.2 Reinstalling the Printer

3.2.2.1 Reinstalling the Printer
When installing the printer after moving it on the
same floor having no step
If you have moved the printer to the installation
site on the same floor having no step without
draining ink, check the operation test pattern.
When installing the printer after moving it on the
same floor having a step(s)
If you have moved the printer to the installation
site on the same floor having a step(s) with ink
drained, install it again in the same manner as that
for initial installation after reception of the
delivered printer.
1) Unpack the printer.
2) Remove the cushioning materials and tape
from the printer.
3) Install the maintenance cartridge.
4) Remove the belt stopper.
5) Connect the power cord.
6) Turn on the Power button and install ink tanks
according to the displayed messages. Ink filling
make preparations
make preparations
will starts.
Load paper and check for normal operation.
for
for
0013-4210
Chapter 3
3-19