Canon iPF6100 Service Manual page 342

Display massage
Wrong paper feed 03061000-2E15
slot for this paper
type.
Press Load/Eject
and reload the
paper.
Manual printing 03862000-2E0C
is selected, but a
roll is loaded.
Press Load/Eject
and
remove the roll.
Hardware error. 03130031-291D
03130031-291D
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2E23
03130031-2E23
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2F14
03130031-2E14
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2F16
03130031-2E16
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2F17
03130031-2E17
Turn off printer,
wait, then
turn on again.
Code* Condition detected
Paper type mismatch
Data with a cut sheet specification
has been received when roll media
are loaded.
Spur cam sensor detection failure
Cutter unit failure
Writing to the ASIC register
disabled
Mist fan error
Suction fan lock detection error
Chapter 8
Action
Check the type of paper that can
be fed and reload the paper.
Load cut sheets at the paper tray
port.
Check the spur cam sensor.
Check the cutter unit.
Replace the main controller
PCB
Check the mist fan.
Check the suction fan.
8-9