Canon iPF6100 Service Manual page 345

Chapter 8
Display massage
Hardware error. 03130031-2F32
03130031-2E32
Turn off printer,
wait, then
turn on again.
Cannot calibrate. 03130031-2F34
Press OK and try
calibration again.
Calibration 03130031-2F35
There is a problem
with the
multi-sensor.
Press OK to cancel
calibration.
Hardware error. 03130031-2F3A
03130031-2F3A
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2F3B
03130031-2F3B
Turn off printer,
wait, then
turn on again.
Hardware error. 0130031-260E
03130031-260E
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-2618
03130031-2618
Turn off printer,
wait, then
turn on again.
Hardware error. 03130031-260F
03130031-260F
Turn off printer,
wait, then
turn on again.
8-12
Code* Condition detected
Multi sensor error
Color calibration adjustment
failure error
Color calibration disabled
Valve motor error
CS communication error
Gap detection error
VH voltage error
Gap reference surface error
Action
Check the environment for
interferences from outside light.
Replace the multi sensor unit.
Check the environment for
interferences from outside light.
Replace the multi sensor unit.
Check the parts counter in
service mode.
Replace the multi sensor unit.
Check the ink supply unit.
Remove the ink tanks and then
reload them.
Check the main controller PCB.
Check the carriage unit and
surrounding parts.
Replace the main controller
PCB.
Check the power supply unit.
Replace the reference surface
sheet.