Canon iPF6100 Service Manual page 325

(1) Version numbers of the firmware installed in the printer, boot ROM, and MIT DB format
(2) Printer information
For more item details, see "Detail of Service Mode" > "a) Display".
(3) Counter information
For more item details, see "Detail of Service Mode" > "e) Counter".
(a) Consumables status
(b) Number of days elapsed since the counter was last reset
(c) Counter value
(d) Value with which consumables reach their replacement timing
(e) Ratio of the current count to the replacement timing
(f) Cumulative counter value
(4) History of execution of color calibration
(a) Order of the date of execution
When the value becomes larger, the date becomes older.
(b) Date of execution
(c) Operation executed
0: Automatic Restore Default with Head Replacement
1: Replace Multisensor
2: General Adj.
3: Restore Default
4: Media-Based Adj. (not used)
5: Media-Based Dfls. initialization (not used)
(d) If General Adj. is executed, the paper type is indicated; if Replace Multisensor (GAP CALIB) is executed,
the unit version is indicated.
(e) If General Adj. is executed, the run-time temperature and relative humidity are indicated.
(5) Ink saver mode setting
(a) Ink saver mode status
(b) Number of times ink save mode has been executed (unit: times).
Chapter 7
7-29