Canon iPF6100 Service Manual page 216

Chapter 4
b) Precaution for mounting the purge unit
1) When mounting the purge unit, pull out the waste ink tube[1] from the back of the printer to the position
where the marking is visible. It the waste ink tube is not pulled out to the marking position, it may bend and
cause ink leakage.
Make sure that there is no break or the twist of the waste ink tube from the front of the printer.
2) Check waste ink tube[1] from the front of the unit to make sure that it is not broken or twisted.
4-44
F-4-77
[1]
F-4-78
[1]