Canon iPF6100 Service Manual page 59

[System Setup]
Setting Item
[Warning] [Buzzer]
[Detect
Mismatch]
[Keep Media
Size]
[Paper Size [Sht Selection]
Basis]
[Sht Selection 1] If roll size detection is activated, choose whether ISO A3 (297 mm) and
[Sht Selection 2] If roll size detection is activated, choose whether 10in. (254 mm) or JIS
[TrimEdge
Reload]
[Noz. Check
Freq.]
[Sleep Timer]
[Length Unit]
[Time Zone]
[Date Format]
[Date & Time] [Date]
[Time]
[Language]
[Contrast Adj.]
[Reset
PaprSetngs]
T-1-20
Description, Instructions
Set the buzzer. Choose On for the buzzer to sound in case of errors.
Choose Warning for notification (display of a warning message) during
printing if the paper type specified in the printer menu does not match the
paper type in the printer driver. Choose None to continue print without
notification. Choose Pause to have printing paused under these
circumstances. In this case, you can continue printing by pressing the
Online button.
Choose On to use the paper size setting as the basis for printing instead of
other settings. The margin setting of the printer menu will be used instead
of the margin setting of the printer driver if the latter is smaller, which
may prevent text or images in the margin from being printed. Choose Off
to use the printer driver settings instead. Even if the margin setting of the
printer driver is smaller than that of the printer driver, text or images will
not be cut off. However, this requires longer paper because the actual
margin will be equal to the margin setting of the printer driver plus the
margin setting of the printer menu.
If sheet size detection is activated, choose whether ISO A3+ or ANSI B
Super is applied when an inbetween size is detected.
300 mm Roll is applied when an inbetween size is detected.
B4 (257 mm) is applied when an inbetween size is detected.
Keeping a roll in the printer for a long time without printing on it may
leave a depression on the leading edge.
When printing quality is most important, we recommend setting this
option to On so that the paper edge is automatically cut before printing.
Specify the timing for automatic checks of nozzle clogging. Choose Off
to disable checking. Choose 1 page to check after each page is printed.
Choose 10 pages to check once after every ten pages are printed.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is displayed. You can
switch the unit displayed for Roll Length Set and the remaining paper
amount displayed in the submenu.
Specify the time zone. Time zone options indicate a main city in this time
zone and the difference from Greenwich Mean Time.
Specify the date format.
Set the current date.
Set the current time.
Specify the language used on the Display Screen.
Adjust the contrast of the Display Screen.
Restores settings that you have changed with Media Configuration Tool
to the factory default values.
Chapter 1
1-47