Canon iPF6100 Service Manual page 224

Chapter 4
6) Remove the cutter unit and cutter mounting plate.
Refer to DISASSEMBLY/REASSEMBLY > Point to Note on Disassembly and Reassembly > Cutter
7) Remove the two screws[1], and then remove the support plate[2].
[1]
8) Remove the four screws[1] and joint[3], and then remove the two ink tank unit R[2].
4-52
[1]
[2]
F-4-92
[1]
[3]
[2]
F-4-93