Canon iPF6100 Service Manual page 313

Display
RESET SETTINGS
3) NOZZLE CHK POS.
This mode for adjusting the optical axis of the head management sensor. For details, refer to "Disassembly/
Reassembly" > "Adjustment and Setup Items" > "Procedure after replacing the head management sensor".
4) GAP CLIB.
This mode measures the gap between the printhead and media by multi sensor and corrects the calibration value.
d) REPLACE
1) CUTTER
This mode is for replacing the cutter unit.
2) L&R PRINTHEADS
Replaces printheads L and R.
e) COUNTER
Displays the life (operation frequency and time) of each unit, print counts for each media type, and else.
The count values can be printed from [PRINT INF].
1) PRINTER: Counters related to product life
Display
LIFE TTL
LIFE ROLL
LIFE CUTSHEET
LIFE A-F
POWER ON
W-INK
CUTTER
WIPE
2) CARRIAGE: Counters related to carriage unit
Display
PRINT
CR COUNT
CR DIST.
PRINT COUNT
3) PURGE: Counters related to purge unit
Initialize the registration adjustment values (to 0).
Cumulative number of printed media (equivalent of A4)
Cumulative number of printed roll media (equivalent of A4)
Cumulative number of printed cut sheets (equivalent to A4)
Cumulative number of printed media for environments A to F
Cumulative power-on time (excluding the sleep time)
Remaining capacity of the maintenance cartridge
Number of cutting operations (count as 1 by moving back and forth)
Number of wiping operations
Cumulative printing time
Cumulative carriage scan count (count as 1 by moving back and forth)
Cumulative carriage scan distance (count as 1 by moving 210mm)
Cumulative print end count (count as 1 by capping)
Description
T-7-14
Description
T-7-15
Description
Chapter 7
Unit
sheets
sheets
sheets
sheets
Hours
%
Times
Times
Unit
Hours
Times
Times
Times
7-17