Led Indicators - Moxa Technologies EtherDevice Hardware Installation Manual

LED Indicators

The front panel of Moxa EtherDevice Server contains several LED
indicators. The function of each LED is described in the table
below.
LED
P1
P2
Fault
10/LNK/ACT
Color
AMBER
AMBER
RED
GREEN
MOXA EtherDevice Server Hardware Installation Guide
State
Power is being supplied to
On
power input P1
Power is not being
Off
supplied to power input P1
Power is being supplied to
On
power input P2
Power is not being
Off
supplied to power input P2
Moxa EtherDevice
Server's self-test failed or
On
power to one of the power
inputs is cut off.
Moxa EtherDevice
Off Server's self-test was
successful
10 Mbps link has been
On
established
Data is being transmitted
Blinking
at 10 Mbps
Port's 10 Mbps link is
Off
inactive
Hardware Overview
Description
4-3