Grounding Moxa Etherdevice Server - Moxa Technologies EtherDevice Hardware Installation Manual

Grounding Moxa EtherDevice Server

Grounding and wire routing helps limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection
from the ground screw to the grounding surface prior to connecting
devices.
This product is intended to be mounted to a well-grounded
mounting surface such as a metal panel.
3-4
MOXA EtherDevice Server Hardware Installation Guide
SG: The Shielded Ground (sometimes called
Protected Ground) contact is the left most
contact of the 3-terminal Alarm Contact
terminal block connector when viewed from
the angle shown here. Connect the SG
wire to an appropriate grounded metal
surface.