Specifications - Moxa Technologies EtherDevice Hardware Installation Manual

Specifications

Interface
RJ45 Ports
Fiber Ports
LED Indicators
Alarm Contact
Technology
Standards
Forward and Filtering Rate
Packet Buffer Memory
Processing Type
Address Table Size
Management
Optical Fiber
Distance
Wavelength
Min. TX Output
Max. TX Output
Sensitivity
1-6 MOXA EtherDevice Server Hardware Installation Guide
10/100BaseT(X) auto negotiation
speed, F/H duplex mode, and auto
MDI/MDI-X connection
100BaseFX ports (SC connector)
Power, Faults, ACT, LNK, 10/100
One relay output, current carrying
capacity of 1A @ 24 VDC
IEEE802.3, 802.3u, 802.3x, 802.1D
148810 pps
256 KB
Store and Forward, with IEEE802.3x
full duplex, non-blocking flow control
4K uni-cast addresses
SNMP V1.2c, MIB-II, Ethernet-like MIB,
EDS-SNMP OPC Server (Optional)
Single mode fiber for 15 km,
Multi mode fiber for 2 km
1310 nm
-15 dBm (Single), -20 dBm (Multi)
-6 dBm (Single), -14 dBm (Multi)
-36 ~ -32 dBm (Single),
-34 ~ -30 dBm (Multi)