ALLIANCE 120 Series Installation, Operation & Maintenance Manual page 55

Step 2: Load Laundry
Open loading door and load cylinder with laundry.
Maximum drying load for 120 models is 54.4 kg
(120 pounds), for 170 models is 77.1 kg (170 pounds)
and for 200 models is 90.7 kg (200 pounds). DO NOT
OVERLOAD.
NOTE: Overloading causes slow drying and
wrinkling.
Close loading door. Tumble dryer will not operate with
the door open.
70458101 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 3: Determine Control Type and
Temperature Setting
Refer to the various controls and follow the
instructions for the appropriate control type.
The type of fabric being dried will determine the
temperature setting. Consult the fabric care label or
fabric manufacturer to determine proper temperature
setting.
IMPORTANT: Always follow the fabric care
instructions supplied by the garment manufacturer.
Step 4: Remove Laundry
When the cycle is complete, open door and remove the
laundry.
Operating Instructions
53