Requirements For The User - eKey Fingerscan Access Control System Operating Instructions Manual

General
6.3 RISKS ASSOCIATED WITH INTENDED USE
The sensor surface of the thermal line sensor, which is primarily used for the
ekey home FS WM
ekey home FS IN
can become very hot (>50°C) when exposed to direct sunlight. In order to avoid burns and scalds of the
fingertips, it is recommended to test the temperature by shortly touching the sensor. If needed, place
your hand over the scanner making a cooling shade.
Apart from that, there are no other known risks in normal use of the system.

6.4 REQUIREMENTS FOR THE USER

It is essential for the installer to study the supplied manuals (Mounting instructions, Wiring, and Operating
instructions) before installing the devices. The installer (system commissioner) is required to possess
professional certificated training in the area of electrotechnical engineering.
The user has to use the system in accordance with these instructions. Otherwise, no special knowledge is
necessary to operate the system.
6.5 NOTE ON PRODUCT LIABILITY
In below listed cases, the security provided respectively the protection of the device may be impaired.
The liability for the operability of the equipment is transferred to the operator / administrator / user:
The device is not operated, maintained and cleaned in accordance with the respective manual.
The device is used outside of the application area specified herein, e.g. in automotive applications,
hazardous areas, safety-critical applications (thereat to life or physical condition)
The operator carries out unauthorized changes on the devices
...
© ekey biometric systems GmbH Operating instructions ekey home Page 9 / 41