Deleting A User; Setting A New Security Code - eKey Fingerscan Access Control System Operating Instructions Manual

General
Once „EF" appears on the display, you have 60 seconds time to swipe your finger, starting at the
top knuckle downwards, over the sensor. The finger scanner status LED lights up
operation mode Enrollment. The device is waiting for a finger to enroll.
The fingerprint should be recorded in the manner described in section 7.2. The finger scanner
possesses a (LED) status display, which signalizes using two different colors, after you have swiped
your finger over the sensor, if the enrollment was successful or not:
8.2.1.8

DELETING A USER

The "DELETE USER" (du) function always relates to all of the user´s data. It is NOT possible to delete
individual fingers. If a user is deleted, all his recorded fingers will be irrecoverably deleted.
D: DELETE USER (du)
ENTER SE CURITY DISPLA Y + SE TTING
STA RT
CODE
SEE
B:
1.) Look up in the handwritten user list the user number which you wish to delete.
2.) First enter the security code as per 8.2.1.6
3.) Press the > button several times until "du" (delete user) is displayed.
4.) Press the OK button.
5.) Use the < and > buttons to select the desired user number to be deleted from the system.
6.) Press the OK button.
7.) "OK" is then shown on the display for a short time. The device then returns to normal mode.
8.2.1.9

SETTING A NEW SECURITY CODE

Please be aware that the device cannot be operated further without setting a new security code. If you
enter a new security code, then you will always need this code in the future in order to make changes
(finger enrollment, delete user, etc.) in your ekey home system.
F: CHANGING THE SECURITY CODE (Sc)
ENTER SE CURITY
CODE
STA RT
SEE B:
1.) First enter the security code as per 8.2.1.6
© ekey biometric systems GmbH
Red: The finger could not be scanned successfully,
Please repeat the enrollment process. Read section xxx before doing so.
Watch the movie on the DVD.
Green: The finger has been succesfully recorded (scanned). The enrollment was
successful Enter the user name on the user list, which you maybe have on paper,
at the corresponding place.
KEY STROKE
Select MENU
ITEM du
DISPLA Y + KEY STROKE
SE TTING
Select MENU
NEW CODE
ITEM Sc
Operating instructions ekey home
DISPLA Y + KEY STROKE
SE TTING
Select USER
NUMBER
DISPLA Y + KEY STROKE
SE TTING
NEW CODE
DIGIT 1
DISPLA Y DISPLA Y
The selected user has
DISPLA Y + KEY STROKE DISPLA Y
SE TTING
DIGIT 2
Siche rhe itscode ist
orange =
FINISHED
been deleted!
DISPLA Y
FINISHED
De r NEUE
dam it ak tiv!
Page 20 / 41