Entering The Security Code - eKey Fingerscan Access Control System Operating Instructions Manual

General
8.2.1.6

ENTERING THE SECURITY CODE

The security code allows you to avoid system manipulations by unauthorized people. Since the control
panel is to be mounted in a secure area, an unauthorized person will have to get access to this secured
area first. This security code can then be described as an additional hurdle.
After 3 incorrect attempts, the device is blocked for 30 minutes and the control panel display
shows error code
once is has been re-connected to the mains.
The factory default setting for this code is „99". Change this code as soon as you have started up the
system to any 2-digit code of your choice.
STA RT DISPLA Y
STROKE
1.) Press the OK button on the control panel.
2.) Enter the left digit of the security code using the < and > buttons (factory setting is 9)
3.) Press the OK button.
4.) Enter the right digit of the security code using the < and > buttons (factory setting is 9)
5.) Press the OK button.
The display shows „Eu" (Enroll user).
8.2.1.7 ENROLLING A FINGERPRINT IN THE SYSTEM
In ekey home a maximum of 99 fingerprints can be enrolled. These 99 fingerprints can be assigned to 99
user IDs. You can for example
administrate 11 users, each one enrolling 9 fingerprints or
administrate 99 users, each one enrolling only 1 fingerprint or
opt for any other mixed setup.
Generally speaking, we recommend to:
save at least 2 fingerprints per user (ideally from different hands)
use index and middle fingers. From an ergonomic point of view, they are best suited for proper
operation resulting in the highest level of recognition.
avoid using thumbs and little fingers.
create a user list assigning the user ID to a user name. You can find a template in the
accompanying DVD.
stick to the suggested numbering of the respective fingerprints (see below).
Before adding a fingerprint into the system, please read through section 7.2
"Operating the finger scanners", or watch the movie on proper use on the
accompanying DVD. Using the finger scanner properly is essential for a stable
operation, and this in turn starts during the fingerprint enrollment. Properly
recorded fingerprints will simply work better!
© ekey biometric systems GmbH
. If the control panel is disconnected from the mains, the counter resets itself
KEY DISPLA Y + KEY STROKE
SE TTING
Set security code
DIGIT 1
Operating instructions ekey home
DISPLA Y+ KEY STROKE
SE TTING
Set security code
DIGIT 2
DISPLA Y
FINI SHED
Page 18 / 41