eKey Fingerscan Access Control System Operating Instructions Manual page 27

General
You can now start setting up the system and entering user data.
ENTERING THE SECURITY CODE
8.2.2.4
The security code allows you to avoid system manipulations by unauthorized people. However, the control
panel is normally mounted within the secured area (electric control cabinet), so for an unauthorized
person to try to manipulate the system, must this person already be within this secured area. This
security code is an additional hurdle, which the unauthorized person should override.
After 3 incorrect attempts, the device is blocked for 30 minutes and the control panel display
shows „Locked for 30 min". If the control panel is disconnected from the mains, the counter resets
itself once is has been re-connected to the mains. In addition, the system has to be in the "System
OK" status (finger scanner and control panel are connected to each other). If this is not the case,
the lock will not expire!
The factory default setting for this code is „99". Change this code as soon as you have started up the
system to any 2-digit code of your choice.
DISPLA Y
1.) Press the
2.) Enter the left digit of the "security code" using the
3.) Press the
4.) Enter the right digit of the "security code" using the
5.) Press the
6.) The LCD display now shows the main menu. You may proceed with changes in the system.
8.2.2.5 ENROLLING A FINGERPRINT IN THE SYSTEM
In ekey home a maximum of 99 fingerprints can be enrolled. These 99 fingerprints can be assigned to 99
user IDs. You can thus for example
administrate 11 users, each one enrolling 9 fingerprints or
administrate 99 users, each one enrolling only 1 fingerprint or
opt for any other mixed setup.
If you have already enrolled 99 fingerprints and you attempt to add the 100
will be displayed on the LCD:
© ekey biometric systems GmbH
KEY DISPLA Y
STROKE
SECURITY CODE D igit 1
button on the control panel.
button.
button.
Operating instructions ekey home
Must be „System OK"
The wrong security code has been
entered 3 times in a row. The device is
locked for 30 minutes.
KEY DISPLA Y
STROKE
SECURITY CODE D igit 2
buttons.
buttons.
KEY DISPLA Y
STROKE
th
, the following error message
Page 27 / 41
FINISHED