eKey Fingerscan Access Control System Operating Instructions Manual page 31

General
If you press
and you will be back to the finger overview.
The fingerprint should be recorded in the manner described in section 7.2. The finger scanner
features a (LED) status display, which signalizes using two different colors, after you have swiped
your finger over the sensor, if the enrollment was successful or not:
„Enrollment OK" will be displayed for approx. 1 sec on the control panel, if the finger has been
enrolled with success. After that the finger list shows up again. You will then see the relay number
beside the finger description, meaning that it has been enrolled successfully.
12.) You have now concluded the finger enrollment. You may now enroll other fingers, or go back
to the main menu by pressing
8.2.2.6 DELETING A USER
The „DELETE USER" (du) function always relates to all of the user´s data. It is NOT possible to delete
individual fingers. If a user is deleted, all his recorded fingers will be irrecoverably deleted.
DISPLA Y
START
1.) First enter the security code as per 8.2.2.4.
2.) Select "Delete user" in the main menu using the
3.) Press the
4.) Select the user number which is to be deleted from the system using the
© ekey biometric systems GmbH
, the finger enrollment will be canceled, without any finger having been enrolled,
Red: The finger could not be scanned successfully,
Please repeat the enrollment process. Read section 7.2 before doing so.
Watch the movie on the DVD.
Green: The finger has been succesfully enrolled (scanned). The enrollment was
successful.
.
Enter sec urity DISPLA Y
code
See B:
Select the „Delete
user" menu item
button.
Operating instructions ekey home
KEY DISPLA Y KEY
STROKE STROKE
Select the user to
be deleted
buttons.
The finger has been enrolled.
DISPLA Y KEY
STROKE
This user´s fingers will all be
deleted! The user name is set back
to the factory settings.
buttons.
Page 31 / 41
DISPLA Y
F
I
N
I
S
H
E
D