Search Mode: Installing A Local Printer - CCTV DN-1808S Manual For Installer And User

2.14 Search Mode: Installing a Local Printer

[Installing a Local Printer]
>
Turn off the DVR by left clicking on the 'Power' button on the Main View Screen.
>
Connect your printer to the DVR. (25-pin parallel or USB cable)
>
Turn on the printer.
>
Restart the DVR.
>
The DVR will detect the printer when it starts up and prompt you for the driver installation disk.
>
Follow the onscreen directions to install the printer and set it as the 'Default' printer.
>
When the printer installation is finished the DVR will start up normally.
[If the DVR does not detect the printer]
>
Make sure the printer is connected to the DVR.
>
Make sure the printer power cable is plugged in and the printer is turned on.
>
Restart the DVR. If the printer is still not detected, proceed to step 4.
>
Press the 'Windows' key on your keyboard to access the Start Menu.
>
Choose 'Settings' and then 'Printers'.
[Add printer]
Click 'Next' to begin installation.
The printer window will open. Double
clock on the 'Add printer' icon.
Choose 'Local Printer' if the printer is
physically connected to the DVR by a
25-pin parallel or USB printer cable.
Choose 'Network Printer' if you plan to
use a shared.
74