Table of Contents
Advertisement
1
2
[Main Volume]
Use the sliders to set the Main Volume to
between ½ and ¾ up.
3
[Microphone Volume]
Set the Microphone volume to the same
range.
4
[Wave Volume]
Set the Wave volume to the same range.
5
[Mute]
Place a check in the 'Mute' box if you do not want the 'Live' audio from the micro-
phone to play through the speakers.
(Especially if you want to listen to recorded audio in Search mode.)
The Recorded audio will still playback in Search mode.
Uncheck the 'Mute' box to test the microphone volume level.
If the Live volume is too high or too low,
Return to the 'Sounds and Multimedia Properties'
box and click on the Recording 'Volume' button.
This will bring up the 'Record Control' box.
1
[Output Volumes]
When the 'Sounds and Multimedia Properties'
box appears you can adjust the volumes and
other properties for both the Record and Play-
back devices.
Click on the Playback 'Volume' button to adjust
your output volumes first.
2
4
3
5
41
Advertisement
Table of Contents
