Table of Contents
Advertisement
1.8 Setup
Left click on the "Setup" button to enter Setup mode.
>
When you click on setup for the first time you
will be prompted to enter a password.
Leave the user level set to Level 1 (Administrator) and
use the keyboard to enter a 4 digit numeric password (4
characters, all numbers). You may left click on the num-
bers on the 'Virtual Keypad' if no keyboard is available.
You may also press "Enter" on your keyboard or click on
"OK" with the left mouse button if you want no password
set up at this time. (You can change this later in the
"Password Setup" section.)
>
You will then be asked if you want to create the
default user database.
Click on "Yes" or press "Enter" on your keyboard to continue.
>
You will then be prompted to "Confirm" or, re-enter your pass-
word again to gain entry to Setup mode.
Once you have created the password database you will not be able to
access Setup or Search mode without it.
>
Your new DVR is "Ready to Go" right
out of the box. It is factory preset to start up
and begin recording data without any effort
on your part. Just hook up your cameras and
turn it on.
>
In order to fine tune your installation
and customize the DVR to get the best per-
formance for your particular situation, or to
setup extra features such as Pan/Tilt/Zoom
cameras, Sensors and Control relays, Record
mode quality and scheduling, Custom screen
divisions, etc., the DVR is equipped with an
extensive array of options available through
the "Setup" mode.
Remember your password!
14
Advertisement
Table of Contents
