Pan/Tilt Zoom Controls - CCTV DN-1808S Manual For Installer And User

2.2 PAN/TILT Zoom Controls

[Go To]
Click on the 'Go To' button to enter your pre-set camera positions.
The 'Go To' button will change to 'Setup'.
Use the Pan/Tilt/Zoom controls to move the camera to the first position. Click on the '1' button to set
the position. Move the camera to the next position and click on the '2' button to enter that position.
You may set up to 10 pre-set positions.
Click on the 'Setup' button to save your changes and test the presets you have entered.
[Screen Division]
Click on a screen division button or click on the image to return to normal view mode. Clicking on the
image will toggle between normal and full screen mode.
[Quit]
Click on the 'Quit' button to close the Pan/Tilt/Zoom controls and return to the Main Screen.
61