Table of Contents
Advertisement
1.7 Main Screen
1
Clock
Indicates current date and time
Mode Indicator
2
Mode indicator will indicate whether you are in
Display, Search, or Pan /Tilt mode.
Full Screen View
3
This button will set the main screen to "Camera
only" view. The GUI (Graphic User Interface)
which includes the Screen Division buttons, the
Event Indicators, the Clock, Setup and Search
buttons, Power button, etc. will be hidden.
Right click on the screen to return to normal
view.
Quad Rotation Mode
4
Sets main view to 4 camera split and rotates view
continuously through all active cameras starting
with 1~4, then 5~8, then 9~12, then 13~16, then
back to 1~4, etc.
Click on an image, or select a Screen division
button to stop rotation and return to normal mode.
Main View Screen
1
This is where the live im-
ages from your cameras
will appear.
2
Left click on any image to
bring it to full screen
view. Left click on the
image again to return to
normal view.
3
4
5
6
5
Setup and Search Modes
Left click to enter Setup (Camera selection,
Screen division, Schedule, Audio, Motion, etc.)
or Search Mode. (Review and backup recorded
data)
6
Storage Indicator
Top line shows total Hard Drive space allo-
cated and available for data storage.
Numbers in the blue box show Hard Drive
space that has been used for data storage in
Megabytes and Percentage of free space re-
maining. When percentage of free space
reaches 0%, the DVR has used all available
storage and will begin to overwrite (replace)
the oldest recorded data.
(It is normal for the 'Free Space' indicator to
read '0% Free' once the DVR has started
overwriting the oldest data. This number will
not change unless you reallocate (erase) the
storage drive.)
12
Advertisement
Table of Contents
