Table of Contents
Advertisement
1.27 Adding Backup Schedule
2
3
4
6
5
2
[Title]
Type in the title of the backup.
3
[Date & Time]
End Date
> Set the end date for the data you wish to
back up.
(Example: To back up a night of data from
5:30pm until 8:30am the next morning, select
the day that follows the 'Start Date'.)
End Time
> Enter the end time of the data you wish to
back up.
(Example: To back up a night of data from
5:30pm until 8:30am, enter 8:30 AM in the End
Time box.)
> The back up will automatically start when
the End Time has passed.
4
[Rotate Option]
Use the Rotate Option to cause your backup to
repeat automatically. Back up the same period
of time every week, month, or year. If a Rotate
Option is used, the dates are treated differently
according to the option chosen.
Example:
Start Time "Tuesday, February 11, 2003at 5:30
PM"
End Time "Wednesday, February 12, 2003 at
8:30 AM"
1
In this example, if you choose the Rotate Option:
Week: Every Wednesday morning at 8:30am, the
previous 15 hours of data will be backed up. The
numeric date, month, and year are ignored.
Month: On the 12
the previous 15 hours of data will be backed up. The
day of the week (Tuesday, Wednesday), month, and
year are ignored.
Year: Every year on the 12
will be backed up. The day of the week (Tuesday,
Wednesday), and year are ignored.
None: The selected backup will occur only one time,
on the selected date and time.
1
[Media List]
Displays list of available media. If the sys-
tem fails to backup onto the first medium on
the list, it will attempt to backup onto the
secondly listed medium and so on.
The system can backup onto the following
media:
>
Hard Disk Drive
>
CD-ROM
>
Portable Drive
>
Network Drive
>
Remote IP Address
[Up/Down/Delete]
>
Move media up, down, or delete a me-
dia from the list.
[Add media]
>
Add a medium to the list. You can add
up to 8 media to the list. (see next page)
5
[Backup Start Time Interval After]
You may have the backup begin Immediately
after the 'End Time' has passed, or you may
choose to delay the backup for up to 4 hours
after the 'End Time' has passed.
6
[Setup]
[Overwrite mode]
If there is not enough space to create a backup,
the system will automatically delete the old data
[Priority]
Set backup's priority when other backups are
scheduled. Setting the option to Backup after
precedent backup will place the backup in queue.
Backup after current backup will ignore the
queue.
th
day of every month at 8:30am,
th
of February the data
47
Advertisement
Table of Contents
