Table of Contents
Advertisement
1.11 Hardware Setup - Controls
2
1
1
[Setup]
Check the box
to use the controls.
[Name]
2
Type in control names. Up to 14 characters are
allowed.
3
[Auto On/Off]
Auto function automatically activates controls
during selected time. To enable Auto function
choose the time from scroll list. Default is set
from 00:00 to 24:00.
3
4
5
4
[Sensor]
To connect a sensor to a control, type the
number of the sensor on appropriate control
number.
If you wish to connect multiple sensors to a con-
trol, type the sensor numbers in the box, separat-
ing them by commas.
Example: In order to turn on Control 3 when
Sensor 1 or Sensor 2 triggers, type "1,2" in the
box against Control 3.
[Working sec]
5
Assign how long the control will stay ac-
tive once it is triggered. Maximum is 255
seconds and default is 0 seconds
18
Advertisement
Table of Contents
