Table of Contents
Advertisement
1.9) Hardware Setup - Cameras
2
3
4
1
1
[Setup]
Check the box
to use the camera.
[Name]
2
Type in the camera names. Up to 14 characters
are allowed.
3
[Sensor]
You can connect sensors to available cameras.
This functions enables cameras to record auto-
matically when the connected sensor (s) is trig-
gered.
To connect a sensor to a camera, type the num-
ber of the sensor in appropriate camera number.
If you wish to connect to multiple sensors to a
camera, type sensor numbers in the box, sepa-
rating them by comma.
Example, in order for Camera 3 to start re-
cording when Sensor 1 or Sensor 3 is triggered,
type "I, 3" in [sensor] box against Camera 4.
Hardware setup allows
users to modify external
devices configurations,
such as cameras, sen-
sors, and controls.
Number of sensors supported ;
-4 sensors : DN1808S, 4408S, 44208S
-8 sensors : All of the rest models.
-16 sensors: available as an option
for any 16- channel model.
[Motion]
4
You can link cameras to other available
cameras. This function enables linked
cameras to record automatically when the
main camera detects movement.
To link a camera to another camera, type the
number of the camera you wish to connect in
appropriate camera number. If you wish to
connect multiple cameras to a camera, type
camera numbers in the box, separating them
by comma.
Example: In order for Camera 5 to start re-
cording when Camera 1 or Camera 2 detects
motion, type "1,2" in [Motion] box against
Camera 5
15
Advertisement
Table of Contents
