Site Information - CCTV DN-1808S Manual For Installer And User

1.19 Site Information

1a
1b
1a
[Site Information]
This is the Site Code you will need to enter in the Connection setup box on the remote or 'Center'
computer when you connect to the DVR by modem or LAN.
You may rename the Site Code to any 7 digit alphanumeric name. (7 characters, using letters,
numbers, or combination of each)
If you have more than one DVR you will wish to monitor remotely, you must use a different Site
Code for each.
(Example): DVR # 1= 100-001
or DVR # 1=elusa01
1b
[Location/Model/Distributor/Sales Date/Other/Notes]
These are optional information entries.
You may fill in these boxes with information relating to your DVR for easy reference.
These entries will be viewable from the remote or 'Center' computer when you connect and enter
the setup mode.
When logging into the Site from the Center PC, the system checks the validity of site code
!
and the correct password. If either is incorrect. The system will automatically disconnect.
Site information tab contains
system-related information
such as Site code, Site name,
Software version,... You can
also adjust Surveillance
mode options here.
DVR # 2= 100-002 DVR #3= 100-003
DVR # 2= store-2 DVR # 3= dvrmain
33