Table of Contents
Advertisement
1.14 Recording /Display
1
2
3
7
1
[Camera]
Display camera numbers.
[Rec. Frame]
2
You can change the recording frame rate of
each camera by sliding the scroll bar.
3
[Emergency Recording ]
You can change the recording speed of each
camera in case of emergency.
4
[Sensor]
You can change the image resolution of each
camera.
320x240 or 640x480 (384x288 or 768x576
PAL) are recommended.
The DVR may automatically adjust the frame
rate when selecting 640x480 (768x576 PAL).
You will be prompted to confirm the change as
shown below.
4
5
6
5
[Rec. Quality]
You can change the quality of the recording for
each camera. The higher recording quality the
more storage space is needed
Example: In order to turn on Control 3 when
Sensor 1 or Sensor 2 triggers, type "1,2" in the
box against Control 3.
[Transfer Quality]
6
You can change the quality of the transfer
image for use during transmission. The
higher transfer quality the more bandwidth
is needed.
[
7
Default]
Change all the setting to the default values.
Recording/Display tab
contains the recording
parameters such as
recording speed, reso-
lution and image qual-
ity.
23
Advertisement
Table of Contents
