E-Map - CCTV DN-1808S Manual For Installer And User

Table of Contents

Advertisement

1.34 E-map

1
[Check Emap]
Place a check in the box to enable the EMAP
function. The EMAP will allow you to place
a bitmap image (*.bmp) into a frame on the
main view screen. (One camera will be re-
placed by the image.) You can place icons on
the image to represent the positions of your
cameras, sensors and controls. The icons will
flash to indicate the associated device has
been activated. Clicking on a camera icon
will open that camera to full screen view.
2
[Position No.]
For a split mode you can assign which channel
the E-map will be displayed (scroll list option
may vary depending on DN model).
>You can copy E-map settings to another chan-
nel of another split screen mode by clicking on
and select the split screen mode and the channel
number you wish to copy to.
3
[User Image Copy.]
Click Find and select the image file to use as
an E- map, then click Go! to display the image.
>The DVR will automatically copy the image
to its backup folder. The backup file will be
overwritten when another E-Map image file is
selected.
>The image file must be in BMP format.
1
2
3
4
5
6
8
4
[Settings]
You can mark positions of the installed cam-
eras, controls, and sensors on the E-Map.
>To mark a device, select its type
control or sensor) and its number.
select the device from the scroll list on the right
and click to the location of the device on the E-
map to insert the devices icon.
>When device type is Camera, you can choose
CCD, Pinhole, or Speed Dome cameras in.
>When device type is Control, you can choose
Light or Alarm controls in
>When device type is Sensor, you can choose
Fire, Laser, or Heat sensors in
8
[Delete Camera, control, sensor
>To delete a device from the E-map, enable
Delete camera, control, sensor, and click on
the device's icon on the E-Map. To delete all
icons, disable Check Emap option.
E-Map tab contains the set-
tings for E-Map. E-Map is a
computer map of the area
with designated locations of
installed cameras, sensors
and controls.
7
7
7
5
(camera,
6
Then
7
1
56

Advertisement

Table of Contents
loading

Table of Contents